Contact Us | Links | FAQs

Youtubefacebook-32x32RSSlinkedin-32x32instagram

 

 

TCL Mixer

  • Home
    Home This is where you can find all the blog posts throughout the site.
  • Categories
    Categories Displays a list of categories from this blog.
  • Tags
    Tags Displays a list of tags that have been used in the blog.
  • Archives
    Archives Contains a list of blog posts that were created previously.
  • Login
    Login Login form
  • Font size: Larger Smaller
  • Hits: 1400
  • Print

Safety Procedures for Working with Concrete

Posted by on in Blog

Concrete is easy to work with: versatile, durable and economical. By taking a few basic precautions, it is also one of the safest building materials known. Relatively few people involved in mixing, handling and finishing concrete have experienced injury.

Outlined below are some simple suggestions - protection, prevention, common sense precautions - useful to anyone working with portland cement and concrete. 

 

Protect Your Head and Eyes

Construction equipment and tools, represent constant potential hazards to busy construction personnel. That's why hard hats are required on construction projects. It is therefore recommended that some sort of head protection, such as a hard hat or safety hat, be worn when working on any construction job, large or small.
Proper eye protection is essential when working with cement or concrete. Eyes are particularly vulnerable to blowing dust, splattering concrete, and other foreign objects. On some jobs it may be advisable to wear full-cover goggles or safety glasses with side shields. Sight is precious. Protect the head and eyes by using proper safety equipment and remaining alert.

 

Protect Your Back

All materials used to make concrete - portland cement, coarse aggregate, sand and water - are quite heavy, even in small quantities. When lifting heavy materials, your back should be straight, legs bent, and the weight between your legs as close to the body as possible. Do not twist at the waist while lifting or carrying these items. Rather than straining your back with a heavy load, get help. Remember to use your head, not your back.

Let mechanical equipment work to your advantage by placing the concrete as close as possible to its final position. After the concrete is deposited in the desired area by chute, pump, or wheelbarrow, it should be pushed (not lifted) into final position with a shovel. A short-handled, square-end shovel is an effective tool for spreading concrete, but special concrete rakes or come-alongs can also be used. Excessive horizontal movement of the concrete not only requires extra effort, but may also lead to segregation of the concrete ingredients.

 

Protect Your Skin

When working with fresh concrete, care should be taken to avoid skin irritation or chemical burns. Prolonged contact between fresh concrete and skin surfaces, eyes and clothing may result in burns that are quite severe, including third-degree burns. If irritation persists consult a physician. For deep burns or large affected skin areas, seek medical attention immediately.

 

The A-B-Cs of fresh concrete's effect on skin are:

Abrasive sand contained in fresh concrete is abrasive to bare skin.

Basic & portland cement are alkaline in nature, so wet

Caustic concrete and other cement mixtures are strongly basic/alkaline (pH of 12 to 13). Strong bases (like strong acids) are harmful, or caustic to skin.

Drying portland cement is hygroscopic - it absorbs water. In fact, portland cement needs water to harden. It will draw water away from any material it get in contact with, including skin.

Clothing worn as protection from fresh concrete should not be allowed to become saturated with moisture from fresh concrete because saturated clothing can transmit alkaline or hygroscopic effects to the skin.

Waterproof gloves, a long-sleeved shirt and long pants should be worn. If you must stand in fresh concrete while it is being placed, screeded, or floated, wear rubber boots high enough to prevent concrete from getting into them.

The best way to avoid skin irritation is to wash frequently with pH neutral soap and clean water.

 

Placing and Finishing

Waterproof pads should be used between fresh concrete surfaces and knees, elbows, hands, etc., to protect the body during finishing operations. Eyes and skin that come in contact with fresh concrete should be flushed thoroughly with clean water. Clothing that becomes saturated from contact with fresh concrete should be rinsed out promptly with clear water to prevent continued contact with skin surfaces. For persistent or severe discomfort, consult a physician.

Comments